Baader 1.25 In/T-2 Focusing Eyepiece Holder: Precise helical focuser screws onto a male T-thread and accepts 1.25-inch fitting eyepieces and accessories.
An excellent choice for fitting a guide cameras to an Off Axis Guider with a T-thread.
Note: Helical focusers rotate, this needs to be be considered when used with cameras.
Features: Baader 1.25"/T-2 Focusing Eyepiece Holder:
- Designed to block unwanted focusing movement.
- Lightweight, compact and easy to mount & remove.
- Featuring of three clamp screws for eyepiece.
- Fine cantering, plus one screw for blocking unwanted focus movement.
- Greatly helps keep a stable focus during planetary imaging or any other task that requires a precise focus position.
- User can rotate the clamped eyepiece or camera to reach focus and block the rotation with the added set screw.
- Screws provides fine control of lateral movement of the inserted equipment for fractions of a millimetre in fine-tuning the centre position of the target object.
Specification: Baader 1.25"/T-2 Focusing Eyepiece Holder:
- Size: 1.25"
- Accessory Type: Focusing Eyepiece Holder
- 6mm focus travel.
- Optical depth ranges from 28mm to 34mm.
- Brass compression ring with three thumbscrews for a secure fit without marring.
- Very precise, one turn gives just 4mm of focus travel.
Kit Contents:
Baader 1.25"/T-2 Focusing Eyepiece Holder
1.25" Plastic Dust Plug
User Operating Instructions Manual
For more information about, Baader 1.25 In/T-2 Focusing Eyepiece Holder website.
Back to top
.jpg&w=75&h=74&page= "Baader Wide T-Ring Canon EOS with D52i to T-2 and S52")
