Manufacturers
Baader Categories
Find out more about the Baader 140mm 3.8 OD Digital Solar Filter
Baader 140mm 3.8 OD Digital Solar Filter: Baader 140mm 3.8 OD Digital Solar Filter is a lightweight and thin solar filter with Photo-Film OD 3.8 which is specially designed for telescopes. Solar filter helps to block the access the light and heat from entering into your telescope wh
Find out more about the Baader 150mm M14, Ø 16mm counterweight-shaft
The Baader M14, Ø 16mm is a counterweight-shaft 150mm long. Its designed for leveling counterweight Ø 16mm and for fine adjustment of telescope systems and when changing from camera to eyepiece Incl. end screw.
Find out more about the Baader 160mm 3.8 OD Digital Solar Filter
Baader 160mm 3.8 OD Digital Solar Filter:
Find out more about the Baader 180mm 3.8 OD Digital Solar Filter
Baader 180mm 3.8 OD Digital Solar Filter: Baader 180mm 3.8 OD Digital Solar Filter is a lightweight and thin solar filter with Photo-Film OD 3.8 which is specially designed for telescopes. Solar filter helps to block the access the li
Find out more about the Baader 18mm Classic Ortho Eyepiece
Baader 18mm Classic Ortho Eyepiece: Baader's Classic Orthoscopic eyepiece is the paramount eyepiece for the planetary observer. Working in close association with Zeiss, Baader Planetarium has acquired an in-depth knowledge of their eyepiece and optic design and production techniques
Find out more about the Baader 1kg Levelling Weight With V Clamp
Baader 1kg Levelling Weight With V Clamp : The levelling weight is a Combination of a Stainless steel 1kg Leveling weight that is fitted with a V clamp, with a diameter 70mm. The levelling weight fits Celestron, SkyWatcher, Vixen, and Baader 70mm rails (vixen/CG-5 style). The weights
Find out more about the Baader 1KG taring weight 75x30mm
Baader 1KG taring weight 75x30mm
Find out more about the Baader 1mm M48 Fine Adjustment Aluminium Ring (Gold)
The Baader M48 Fine Adjustment Ring (Red) is constructed from fine aluminium. The 1mm thick M48 ring are fine tunning in M48 eyepiece projection. It fits in M48 diameter without threads. It helps to avoid the binding between M48 thread parts.
Find out more about the Baader 1mm T-2 Fine Adjustment Ring Aluminium (Gold)
The Baader T-2 Fine Adjustment Ring (Gold) is constructed from fine aluminium. The 1mm thick T-2 ring are fine tunning in T-2 eyepiece projection. This ring fits between the T-2 threads. It helps to avoid the binding between T-2 thread parts.
Find out more about the Baader 1¼" RGB CMOS-Optimized R-Filter
The Baader RGB 1¼"CMOS-optimized R-Filter is ideal from f/15 to f/1.8 and comes with 1¼" (28,5 mm) filter thread. The anti-reflection coatings of RGB filter enhance the transmission to a very high level while reducing stray light and reflections. Thanks to the balanced RGB design th
Find out more about the Baader 2 inch (10nmHBW) visual O III Filter
Baader 2 inch (10nmHBW) visual O III Filter: Baader 2 inch (10nmHBW) visual O III Filter is perfect for planetary observation to produce very high contrast and reveals a level of intricate detail that rivals the best deep sky photographs. The Baa
Find out more about the Baader 2 inch (540nm) Solar Continuum Filter
Baader 2 inch (540nm) Solar Continuum Filter: Baader 2 inch (540nm) Solar Continuum Filter is designed to enhance the visibility of solar granulation and sunspot details. This filter is able to boost contrast and reduce the effects of atmospheric turb
Find out more about the Baader 2 Inch 1:1.70 Glasspath and Coma Corrector
DISCONTINUED PRODUCT
Find out more about the Baader 2 Inch 1:1.8 Refractor Glasspath and Coma Corrector
DISCONTINUED PRODUCT Baader 2 inch Refractor / SC Glasspath corrector 1:1.8 for Baader Mark V Binocular Viewer (needs T-2 diagonal In Section 8 / Code:
Find out more about the Baader 2 Inch 90° BBHS Astro Amici Erect Prism Diagonal
This is is the only erect-image prism in the world which is suited for astronomical observation at high magnification. This prism is hard-silver-coated and protected against aging (as proven already). Dirt is no problem because the silver-coating is applied onto the reflective surfaces.
Find out more about the Baader 2 Inch BBHS Mirror Diagonal With 2 Inch ClickLock-Clamp
The Baader 2" BBHS Mirror Diagonal with 2" ClickLock-Clamp (BBHS means Broadband Hardsilver Coating with dielectric protective overcoating) is nowfeaturing this lift into the silver category.The black housing now is upgraded with a 2" Clicklock-clamp and the all
Find out more about the Baader 2 inch BDS Steeltrack T-2 Adaptor
Baader 2 inch BDS Steeltrack T-2 Adaptor: Baader 2 inch BDS Steeltrack T-2 Adaptor is ideal for astrophotography. It permits attachment of accessories with male T2-thread like camera. It changes the 2" eyepiece side connector of the Diamond Baader Steeltrack focuser into a male T2-thread using on
Find out more about the Baader 2 inch CCD-Narrowband H-alpha OIII and SII filterset
Baader 2 inch CCD-Narrowband H-alpha OIII and SII filterset: Baader 2 inch CCD-Narrowband H-alpha OIII and SII filterset is ideal for high contrast astrophotography especially under extremely light-polluted skies. The perfect deep-sky photos can be obtained
Find out more about the Baader 2 Inch Click-Lock Mirror Diagonal
The Baader features 2" Click lock Star Diagonal that uses the proprietary Baader Dielectric mirror coatings. Baader's Dielectric coatings deliver as high as 99% photo-visual reflectivity along with an extremely hard durable surface. The precision mirror is also oversized, and combines
Find out more about the Baader 2 Inch Clicklock 47mm Eyepiece Extension Tube
Baader 2 Inch Clicklock 47mm Eyepiece Extension Tube: Baader 2 Inch Clicklock 47mm Eyepiece Extension Tube insert the clamp into your scope and then use the extra strong click lock to hold eyepieces safely and securely with the optio
Find out more about the Baader 2 Inch ClickLock CL-M84 Clamp For Pentax Refractors
Baader 2 Inch ClickLock CL-M84 Clamp For Pentax Refractors: Baader 2 Inch ClickLock CL-M84 Clamp For Pentax Refractor is a lightweight and durable ClickLock Clamp which is designed for all Pentax Refractors with 84mm thread. With 2&qu
Find out more about the Baader 2 Inch ClickLock CL-SC Clamp For SCT 2 Inch Thread
Baader 2 Inch ClickLock CL-SC Clamp For SCT 2 Inch Thread:
Find out more about the Baader 2 Inch Clicklock Clamp 37mm Extension
2" ClickLock with 2" CL-Extension 37mm - Eyepiece Clamp with 2-inch Nosepiece from Baader Planetarium This Baader C
Find out more about the Baader 2 Inch ClickLock Clamp For Telescope With M56 Thread
Baader 2 Inch ClickLock Clamp For Telescope With M56 Thread:Baader 2 Inch ClickLock Clamp For Telescope With M56 Thread is a lightweight durable clicklock clamp which is designed specifically for telescopes using M56 thread. With 2" clicklock opening is used to hold t
Find out more about the Baader 2 Inch ClickLock clamp M42 (T-2)
The Baader 2" ClickLock M42 (T2) Clamp, fits anything with a male T2 thread (M42 x 0.75 outer thread). The Baader Planetarium 2" Click-Lock Eyepiece Clamp brings eyepiece holders into a new level. With a simple twist, 2" eyepieces
Find out more about the Baader 2 inch ClickLock clamp M48
Baader 2 inch ClickLock clamp M48: Baader 2" ClickLock M48 Clamp fits anything with a male M48 thread (M48 x 0.75 outer thread). With a simple twist, 2" eyepieces and accessories are instantly locked with such strength that they can literally support an entire telescope without slip
| Displaying 81 to 120 (of 1105 products) | Result Pages: [<< Prev] 1 2 3 4 5 ... [Next >>] |
