![Baader Maxbright II Binoviewer with T-2 Thread and 2\" Nose Piece](imagemagic.php?img=images/Baader-Maxbright-II Binoviewer-with-T-2-Thread.jpg&w=100&h=100&page= "Baader Maxbright II Binoviewer with T-2 Thread and 2\\" Nose Piece")
Manufacturers
Baader Telescope Categories
Baader Telescope
Baader has continued to offer quality telescope accessories to amateur
astronomers all over the world.
They are known for their patented Baader AstroSolar Safety Film, as well as
their line of Baader Hyperion Eyepieces,
ClickLock Clamp,
Solar Filters,
Extension tubes and many more.
Microglobe also offers a complete line of accessories for Baader Telescope. A
range of in-stock telescope accessories are available that includes eyepieces,
brackets, caps and a lot more for the popular brands.
Find out more about the Baader Stabilised Power-Supply For GM-2000 and GM-3000
The Stabilized Power-Supply from Baader is designed for GM 2000 and GM 3000 telescopes. It comes with 220/230 volts Input-voltage, 27 volts output voltage & 10.5 A factory settings. This power supply has 27-volts because 10 Micron mount’s control box can work with 2
Find out more about the Baader 3kg Counterweight for GM 1000 stainless V2A steel
Baader 3kg Counterweight for GM 1000 stainless V2A steel : Twist grip for quick clamping of the counterweight. Made of V2A stainless steel for use with counterweight bar axis diameter of 30 mm.
Find out more about the StarAid Revolution Standalone Autoguiding - Revision B
Stand-alone autoguiding revolutionised No configuration Autoguiding starts automatically as soon as you power on your StarAid. Point your telescope anywhere in the sky, and StarAid will
Find out more about the Baader StarAid 1.25" to C_Mount Adapter Ring 5mm Height
The Baader StarAid 1.25" to C-Mount Adapter Ring, adapts the StarAid Revolution Standalone Autoguiding - Revision B to fit a C-Mount guide-scope. It requires the 1.25" filter thread on the StarAid Revolution. Filters will therefore have to be attached to the front of the guide-scope
Find out more about the Baader BP I Guidescope Rings
Baader Guidescope rings BP I - 60-120mm: This Guidescope having massive, solid, and turned aluminium rings, (width 28 mm) supports surface with photo-threaded connection ¼ "and additionally 2 through-holes 5 mm diameter. Three adjusting screws (M10) with 10mm Ø, ball bearing bearing
Find out more about the Baader BP II Guidescope Rings
Baader Guidescope rings BP II - 110-160mm: Three adjusting screws (M10) with 10mm Ø, ball bearing bearing surface made of V2A steel, covered with a hard rubber sheath (i.e. the screw pressure surface does not rotate during the adjustment of the telescope). The guiding telescope is a
Find out more about the Baader BP III Guidescope Rings
Baader Guidescope Rings BP III 140 - 185mm: Three adjusting screws (M10) with 10mm Ø, ball bearing bearing surface made of V2A steel, covered with a hard rubber sheath (i.e. the screw pressure surface does not rotate during the adjustment of the telescope). The guiding telescope is
Find out more about the Baader 400mm Sidewing Baseplate
Baader 400mm Sidewing Baseplate: Having a side wing of 400 mm long base plate, matching to #2451558 Baader-Sidewings. Among other things, it is used for the reception of Baader guide tube clamps size I, II and III for any auxiliary instruments attachment
Find out more about the Baader 3 Inch Dove Tail Bar 250mm (10 Inch)
Baader 3 Inch Dovetail Bar 250mm 10 Inch: The Modell V (EQ) Celestron, Skywatcher mounting accessories connect telescope and mount either for a permanent setup or to make quick changes from one instrument to the next possible.
Find out more about the Baader 3 Inch Dove Tail Bar With No Holes
Baader 3 Inch Dove Tail Bar 350mm 14 Inch: This Modell V (EQ) Celestron, Skywatcher Mounting accessory connects telescope and mount either for a permanent setup or to make quick changes from one instrument to the next possible.
Find out more about the Baader 470mm Losmandy Dovetail Plate For C8 / C9.25 OTA
Baader 470mm Losmandy Dovetail Plate For C8 / C9.25 OTA: It is designed specifically for Celestron 8" and 9.25" optical tube assembly. The dovetail is lightweight, reliable, rigid and very easy to use. The dovetail is designed is such a way that provides a strong and safe connection
Find out more about the Baader 3 Inch Dove Tail Bar For C91/4 and C11 OTA
Baader 3 Inch Dove Tail Bar For C91/4 and C11 OTA: This V Model (EQ) for Celestron and Skywatcher mounting accessories to connect telescope and mount either for a permanent setup or to make quick changes from one instrument to the next possible.
Find out more about the Baader 3 Inch Dovetail Plate (Losmandy)
Baader 3 Inch Dovetail Plate (Losmandy): This Dovetail mounting accessories connect telescope and mount either for a permanent setup or to make quick changes from one instrument to the next possible one.
Find out more about the Baader 3 Inches Dovetail Bar 230 mm Flat (Losmandy)
Baader 3 Inches Dovetail Bar 230 mm Flat (Losmandy):
Find out more about the Baader 2 Inch Male To Female Thread Inverter Ring
Baader 2 Inch Male To Female Thread Inverter Ring:
Find out more about the Baader T2-Female to T2-Female Inverter Adapter
Baader T2-Female to T2-Female Inverter Adapter is a simple T-2 externally threaded ring that can be used to convert internal (female) T-2 threads. It is useful in adapting accessories that are threaded to accept standard 2" filters. It can be installed and use easily without any dif
Find out more about the Baader 2 Inch male / T-2 male Adaptor with Internal Filter Thread
Baader 2 Inch (male) / T-2 (male) Adaptor with Internal Filter Thread is a lightweight adapter which is designed with internal 2 inch (M48) filter thread for connecting DSLR camera directly. It had T2 male thread on one side and SCT thread on other side. It is compatible with many 2" star diagona
Find out more about the Baader T-2 Adapter for M36.4 Vixen and Takahashi telescopes
Baader T-2 Adapter for M36.4 Vixen and Takahashi telescopes: Baader T-2 Adapter for M36.4 Vixen and Takahashi telescopes is used to converts the Vixen/Takahashi M36.4 internal thread to the T-2 standard external thread. It can be attach to T-2 accessories
Find out more about the Baader 40mm T-2 Extension Tube
Baader 40mm T-2 Extension Tube:
Find out more about the Baader T-2/15mm Extension Tube
Baader T-2/15mm Extension Tube is a lightweight, compact, ultra fast setup and durable extension tube which allow user to securely set or vary the spacing between T-2 component
Find out more about the Baader T-2 / 7.5mm Extension Tube
Baader T-2 / 7.5mm Extension Tube: Baader T-2 / 7.5mm Extension Tube is a lightweight, compact, ultra fast setup and durable extension tube wh
Find out more about the Baader Carl Zeiss Eyepiece Abbe-Barlowlens 1.25-Inch
Baader Carl Zeiss Eyepiece Abbe-Barlowlens 1.25-Inch: Baader Carl Zeiss Eyepiece Abbe-Barlowlens 1.25-Inch is a lightweight and durable eyepiece that is designed for amateurs and professionals. It provides very high contrast and thus
Find out more about the Baader 1.25-Inch DT-4 Nosepiece Extension
Baader 1.25-Inch DT-4 Nosepiece Extension feature a ring/barrel spacer that provides 18mm (0.71") of spacing. It allows you to securely set or vary the spacing between 1.25" components. It has black anodized aluminum construction that assure durability and persistent performance. This extension c
Find out more about the Baader Silica Gel With Colour Indicator
Baader Silica Gel With Colour Indicator : The silica gel beads are perfect for protecting scope or optical accessories from damaging moisture. During transportation, or storage, under some conditions moisture can build up inside expensive optics, while this
| Displaying 1 to 40 (of 916 products) | Result Pages: 1 2 3 4 5 ... [Next >>] |
