Newsletter |
Pulsar
Quantum HD38S Thermal Imaging Scope Monocular |
|
The Pulsar
Quantum 38S Thermal Imaging Scope provides the best possible images in
specific viewing conditions with a quick start-up time. The Quantum imaging
scopes feature short start-up time (5 - 7 seconds) from the push of a button
to full operational status. This is one of the best results in its class.
The Quantum 38S features optical magnification of 2.1x. The unit also has
additionally 2x digital zoom. High resolution (384x288) microbolometer
ensures detailed image and long detection range. |
Quick Start up,
Three Operating and Three Calibration Modes |
The Quantum 38S
suggests three calibration modes: silent manual mode, automatic and
semiautomatic. The automatic mode implies calibration without user
participation. |
In the
semiautomatic mode the user decides on his own if calibration is required
based on the image quality. Manual calibration is carried out by pressing
the button when the lens cap is closed. This mode is recommended for hunting
due to silent operation.
The Quantum S
suggests three operating modes, each designed to deliver best possible image
in specific viewing conditions. The modes are as follows: “City” (enhanced
contrast), “Forest” (low contrast) and “Identification” (improved rendering
of hot objects’ details).
The Pulsar Quantum 38S Thermal Imaging Monocular has a wide range of
operating temperatures with brightness and contrast control.. Even in the
darkest night the Pulsar Quantum 38S Thermal Monocular with Frost-resistant
LED Display will locate your target effectively and easily.
|
|
High Refresh
Rate that is Ideal For Moving Objects |
|
The 30 Hz refresh rate provides a smooth and consistent
image of moving objects.
The control wheel located next to the lens allows the
user to setup brightness and contrast most appropriate for specific
situation.
The Quantum is powered with four AA size (rechargeable)
batteries. The batteries are stored in a container which is then placed in a
battery compartment of the unit.
Operation time of the unit can be significantly increased
by the use of external power supplies that can be connected with a special
jack.
All Quantum models are equipped with an analog video
output to enable connection of external recording equipment or transmitting
image to the display. |
The body of fiberglass reinforced
plastic is able to effectively withstand impact, moisture and dust which
allows the units to be used in extreme conditions. The rubber armouring
ensures secure grip of the unit. |
Pulsar Quantum HD38S 5x50 Thermal Imaging Scope Monocular |
12 Years of successful business and customer service |
|