Nikon's Wireless Remote Adapter Set is a complete remote
control set designed to wirelessly control the shutter release of any
Nikon DSLR camera. The WR-T10 transmitter can trigger any number of
Nikon DSLRs that are equipped with a WR-R10 transceiver. For DSLRs with
a 10-pin connector, the included WR-A10 adapter is required for using
the WR-R10. The WR-T10/WR-R10 units use radio frequencies to
communicate, three frequencies are available to avoid interference when
multiple pairings or photographers are shooting in one location. One
WR-T10 unit can simultaneously release the shutter on an unlimited
number of cameras paired with an attached WR-R10 unit, that allowed
continuous shooting. Three radio frequency channels are available for
use, to prevent interference when multiple pairings or photographers are
shooting in one location. When the WR-R10 is used along with the WR-A10
WR Adapter to connect to select Nikon Digital Cameras with a 10-pin
connector, one camera can be designated as "master" and control the
shutter release of up to 64 WR-R10 transceiver units. Range (line of
sight) from WR-R10 (used with the WR-A10 WR adapter on select D-SLRs,
and acting as a master unit) to WR-R10s is 164 feet, while the range
(line of sight) from the WR-T10 to WR-R10s is 66 feet (20 meters).
Useful for triggering the shutter remotely when using slower shutter
speeds, to prevent camera movement. The remote adapter set is compatible
with the following Nikon cameras: D90, D2X, D2Xs, D2Hs, D3, D3X, D3S,
D4, D4S, Df, D200, D300, D300S and D600, D700, D800/800E, D5000, D5100,
D5200, D5300, D7000, D7100, D3100, D3200, D3300 and COOLPIX A cameras. |