Sekonic L308s Light
meter Exposure Meter Flashmate
The pocket sized
Sekonic L-308S FLASHMATE is
the smallest and lightest digital light meter in the
Sekonic Light Meter
Sekonic L-308S FLASHMATE is intended to read ambient or flash
exposures in either reflected or incident modes. This is an outstanding budget
meter that can be used as a conservative meter in direct or incident reading
mode. The majority of contemporary photographic digital equipment requires numerous
readings of a manual and memory preservation that would compliment MasterMind.
Not to worry in this case – if you have
Sekonic L308s Light meter Exposure Meter Flashmate all effective functions including custom settings can be
mastered in about ten minutes. Exposures have been perfect. Thanks to
L308s Light meter Exposure Meter Flashmate.
Sekonic L308s Light meter Exposure Meter Flashmate
Sekonic L308s Light meter Exposure Meter Flashmate delivers precise
exposure readings in complete, half, or third-stop rise to mirror the exposure exhibits
of most popular cameras. When set to full-stop mode, exposures are displayed in
tenth-stop increments with a repeat accuracy of +/- 0.1 EV.
Reflected readings capture at a light receiving angle of
about 40-degrees, or somewhat broader than the viewing field of a ordinary
lens. For incident readings, a small, built-in Lumi-sphere slides over the
silicon diode sensor. For flat-field incident readings, a Lumi-disc snaps over
the sensor for metering flat artwork or measuring contrast and/or exposure
ratios within a scene.
With 1/10th of a stop measurement and read out, accurate and
reliable exposures are a snap for D-SLRs or point and shoot digital cameras.
The LCD screen shows information such as ISO, measuring approaches and particular
settings in an effortless to read layout for quick measurements. A built-in
Lumisphere provides a quick switch from incident to reflected light measurements
and a Lumidisc offers precise contrast and brightness measurements.