Enjoy the pleasing view of your DSLR on EdgeHD optical tubes with the usage of Celestron 48mm T-Adapter. The older 42mm adapters are replaced by the this T-Adapter having a larger diameter thus providing a larger light way to the sensors of your camera. This Helps to maximise the light transmission while reducing vignettes around the sensors of your camera. This adapter is optimal for 1 4, 11 and 9.25 inch EdgeHD OTAS.
To work efficiently and correctly this T-Adapter should be used with 48mm camera T-ring. The relative illumination of 42mm sensor and 48mm is shown in the above pictures. The distance from the centre of the camera sensor is the X-axis and the amount of light received is drawn on the Y-axis. Its obvious that the 48mm is receiving more light than the42mm T-Adapter. There is no advantage to the image by using the 48mm T-Adapter rather the 42 mm T-Adapter and 42mm T-Rings should be used instead.
Larger Path to Increase The Light Avaliability
Reduces the Vignetting Around the Edges of sensor
For Full Frame DSLR Sensors
Requires 48mm Camera T-Rings
Directly Attaches to the Rear Cell of the Larger Edge Optial Tubes
Warranty: 2 Years
Compatible Telescopes: Fits all EdgeHD 14, 11 and 9.25 inch
T-Rings Threads: M48 x 0.75
Flange distance: 91 mm
Outside diameter: 72 mm
Celestron 48mm T-Adapter for 14” 11” and 9.25” EdgeHD OTAs
2 Years Limited Warranty
Weight: 498 g
Box Dimensions: 14.2 x 10.4 x 9.3 cm
For more information about, Celestron 48mm T-Adapter for 9.25, 11 and 14 inch EdgeHD OTAs .
Customer Reviews on Celestron 48mm T-Adapter for 9.25, 11 and 14 inch EdgeHD OTAs
|Your Recently Viewed items