Nikon WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set : It is a complete remote control set designed to wirelessly control the shutter release of any Nikon DSLR camera. The WR-T10 transmitter can trigger any number of Nikon DSLRs that are equipped with a WR-R10 transceiver. For DSLRs with a 10-pin connector, the included WR-A10 adapter is required for using the WR-R10.
The WR-T10/WR-R10 units use radio frequencies to communicate, three frequencies are available to avoid interference when multiple pairings or photographers are shooting in one location. One WR-T10 unit can simultaneously release the shutter on an unlimited number of cameras paired with an attached WR-R10 unit, that allowed continous shooting.
Three radio frequency channels are available for use, to prevent interference when multiple pairings or photographers are shooting in one location. When the WR-R10 is used along with the WR-A10 WR Adapter to connect to select Nikon Digital Cameras with a 10-pin connector, one camera can be designated as "master" and control the shutter release of up to 64 WR-R10 transceiver units.
Range (line of sight) from WR-R10 (used with the WR-A10 WR adapter on select D-SLRs, and acting as a master unit) to WR-R10s is 164 feet, while the range (line of sight) from the WR-T10 to WR-R10s is 66 feet (20 meters).
Useful for triggering the shutter remotely when using slower shutter speeds, to prevent camera movement.
Features: Nikon WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set
- Range (line of sight) from the WR-T10 to WR-R10s is 66 feet
- Enable remote control over the camera from greater distances and broader angles
- Designed to wirelessly control the shutter release of compatible
- Nikon DSLR camera
- Provide control over operations such as continuous shooting, movie recording, quiet release mode
- Has three radio frequency channels, to prevent interference when multiple pairings or photographers are shooting in one location
- Useful for triggering the shutter remotely when using slower shutter speeds, to prevent camera movement
- User can use the WR-T10 to simultaneously release the shutter on multiple Nikon D-SLR cameras that have a WR-R10 unit attached and have been paired with the WR-T10
- One WR-T10 unit can be paired with an unlimited number of cameras with a WR-R10 unit attached
- The range (line of sight) from WR-R10 (used with the WR-A10 WR adapter on select D-SLRs, and acting as a master unit) to WR-R10s is 164 feet
- Works well with Nikon D90, D2X, D2Xs, D2Hs, D3, D3X, D3S, D4, D4S, D200, D300, D300S, D600, D700, D800/800E, D5000, D5100, D5200, D5300, D7000, D7100, D3100, D3200, D3300 and Coolpix A cameras
Note: Depending on the camera, there may be a limitation to the accessories that can be attached simultaneously with the WR-R10 Wireless Remote Controller, attempting to forcibly attach accessories can damage the camera or accessory.
Communication between WR-R10 units only available when master camera employs ten-pin remote terminal
Specification - Nikon WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set
- Model WR-R10/WR-T10/WR-A10
- Type Wireless Remote Adapter Set
- Number Of Channels 3
- Channels Frequency 5 ch (2.425 GHz), 10 ch (2.450 GHz), 15 ch (2.475 GHz)
- Interference Prevention Pairing
- Shutter-Release Button Half pressing, full pressing available
- Continuous Shooting Yes
- Live View/Movie Operation Available only with the cameras that have been released since the D4
- Function:
Button Possible to switch (Available only with some of the models that have been released since the D4) the function assigned to an Fn button - Range:
Line of sight from the WR-T10 to WR-R10s is 66 feet (20 meters)Line of sight) from WR-R10 (used with the WR-A10 WR adapter on select DSLRs and acting as a master unit) to WR-R10s is 164 feet (50 meters)
Kit Content:
Nikon WR-R10/WR-T10/WR-A10 Wireless Remote Adapter SetUser Operating Instructions ManualManufacturers Warranty
