Nissin Commander Air 1 With
Receiver Air R - For Canon:
Commander Air 1 With Receiver Air R offers Free-from-cables and the
line-of-sight range. Air 1 commander features the Nissin Air System with 2.4 GHz
radio transmission for wireless master TTL control over NAS-compatible flash
units. This unit is compatible with Canon cameras that utilize E-TTL metering.
The Air 1 offers a triggering range of up to 30m. Also, it features eight
channels and three groups for setting up numerous flashes with different
settings and modes all from the commander unit. High-speed sync is supported
with a maximum sync speed of 1/8000 second along with compatibility for slow,
1st & 2nd curtain sync modes. The zoom setting of the flash can also be manually
adjusted from 24-200mm along with the power from 1/1 to 1/128. The Air 1
features a color LED control panel to view settings and make adjustments as well
as an AF assist beam for focusing in low light conditions. Additionally, it runs
on 2 AAA batteries. The Air 1 is compact and very light in weight and can be
easily carried to any place. Nissin Receiver Air R For Canon is also lightweight
and durable receiver which is combined with the use of Nissin Air 1 Commander
and allows photographers to wirelessly control almost any kind of Nissin Digital
flashes. It is newly developed 2.4GHz radio transmission wireless flash system.
As compared to traditional optical wireless transmitters, 2.4GHz radio
transmitter is less susceptible to angle and obstacle limitations and provides
coverage up to 98 feet. Nissin has included IDs technology in their newly
developed system. These IDs gives to each NAS compatible devices a unique
identity and can set to prevent misfiring in the event of signal interference on
the same channel. Using an Air 1 Commander for the Canon E-TTL / E-TTL II system
and the Air R Receiver, photographers can now set up and control numerous
flashes in an off-camera setup at distances. The receivers add wireless slave
TTL functionality with support for high-speed sync up to 1/8000 second, manual
power control, and manual zoom, with the ability to select between 8 channels
and organize 3 groups. One Commander transmitter can control up to 21 separate
Air R receivers, which can be programmed into three groups to give the camera
user an almost limitless range of lighting options.
Nissin Commander Air 1 With Receiver Air R -
Features: Nissin Commander
Air 1 With Receiver Air R - For Canon
Features - Nissin Air 1 Commander For Canon
Well suited for professional and non-professional photographer.
2.4 GHz radio TTL system for ultra fast applications.
Sits on the camera and sends out 2.4GHz radio signals.
Compact, reliable, lightweight and easy to carry anywhere.
Compatible with Canon cameras that utilize E-TTL / E-TTL II metering.
It can control 3 groups of compatible Nissin Flash with the user friendly
operation panel and variety function, it would be more convenient for the user.
Commander can control the power and zoom settings for flashes in 8 channels and
3 groups as well as transmit exposure compensation settings from -2 to +2 EV.
Features: Nissin Receiver Air R For Canon
New addition to the Nissin Air System (NAS) 2.4GHz radio transmission wireless
Combined with the Nissin Commander Air 1, allows a photographer to wirelessly
control almost any kind of Nissin camera flash and original manufacturer’s flash
with NAS and TTL and HSS support.
High Speed Sync up to 1/8000 seconds.
Less susceptible to the usual issues caused by not having clear line of sight
between transmitter and receiver.
Provides coverage of up to 30 meters (98 feet).
Radio transmission ID technology gives each of the NAS-compatible devices a
unique identity to prevent misfiring in the event of signal interference.
One Commander transmitter can control up to 21 separate Air R receivers, which
can be programmed into three groups to give the camera user an almost limitless
range of lighting options.
Commander Air 1 With Receiver Air R - For Canon
Specification - Nissin Air 1 Commander For
Model: Air 1
Signal Coverage: 30m
Frequency: 2.4 GHz ISM band radio transmission
Exposure Control: Manual/TTL
Vari-Power: 1/1 - 1/128
Maximum Flash Synchronization Speed: 1/8000 sec
Flash Interval: 10 flashes per sec
Wireless Transmission: 30m
Wireless Communication Channels / Group: 8 Channels / 3 Groups
Battery Type: 2 x AAA Batteries
Dimensions: 2.6 x 2.4 x 2.2" / 65 x 60 x 55 mm
Specifications: Nissin Receiver Air R For Canon
Wireless system: Radio
Radio specifications: 2.4GHz ISM band
Channel: 8 channels. Auto or manual select
Flash groups: A, B, C (3 groups)
Power source: 2 AAA batteries (not included)
Guide number: Low GN mode / High GN mode (default)
Mode (set at NAS Commander): TTL, manual and manual zoom
EV Compensation on flash: (TTL) -2.0 - +2.0 in ½ EV increments (manual)
Each group can be adjusted independently or synchronized
Manual output: 8 steps of manual output 1/128, 1/64, 1/32, 1/16, 1/8, 1/4, 1/2,
1/1 – full power
Manual zoom: Manual adjustment 24 / 35 / 50 / 70 / 85 / 105 / 135 / 200mm
Continuous shooting speed: 10 shots per second
Number of flashes: Approx 5000
Transmission distance: Maximum 30 meters (dependent upon the environment)
High Speed Synchronization: 1/8000 sec (controlled by NAS Commander)
External sync socket: Standard PC sync cable
Mode: TTL, N, M zoom, no setting is needed, all settings controlled from the NAS
Synchronization modes: No setting is needed, controlled by NAS commander
Mounting: Built-in stand, cold shoe / 1/4” tripod bush
Dimensions: 60 (L) x 60 (W) x 50 (H) mm
Weight: 55g (excluding batteries)
Nissin Commander Air 1 With Receiver Air R - For Canon
Instruction / User Manual
For more information about, Nissin Commander Air 1 With Receiver Air R - For Canon .
Customer Reviews on Nissin Commander Air 1 With Receiver Air R - For Canon
|Your Recently Viewed items