Description: Velbon CX-mini Tripod
Velbon CX-mini Tripod is a lightweight and small tripod ideally manufactured
for DSLR cameras and compact camcorders.
This is a tabletop tripod, perfect for travellers as well as for indoor/
studio work. The aluminium made three section legs of the Tripod in association
with the sliding centre column come close to the ground as low as only 30 cm,
enabling the tripod a perfect one for macro photography. Velbon CX-mini
Tripod features 3-way pan head that incorporates
a quick release plate (QB-4LC), such that it becomes easy to place the device on
the pod head. The head also has a quick release lock, which secures the
devices and prevent it from falling down.
The leg sections extend to 64cm and fold up to 30 cm. For maximum stability of
Velbon CX mini Tripod, the
legs are provided with locking system at each joint as well as they are
connected to the centre column through brace arm. Each leg tip is covered with a
rubber to protect the interior surfaces from scratches. Its weight is 790 grams
and can support a maximum load of 1 kg.
|
Features - Velbon CX-mini Tripod |
|
Lightweight tabletop tripod |
|
Perfect for Macro work |
|
Aluminium made legs with black colour |
|
Quick Release plate - Velbon CX-mini Tripod |
|
Sliding centre column with radial braces |
|
3-way Pan head with quick release lock |
|
Leg tip covered with Rubber - Velbon CX-mini Tripod |
|
Specifications - Velbon CX-mini
Tripod |
|
Max height |
64cm |
|
Min height - Velbon CX-mini Tripod |
30cm |
|
Leg sections |
3 |
|
Folded Size - Velbon CX-mini Tripod |
30cm |
|
Weight (g) |
790 |
|
Max load (g) - Velbon CX-mini Tripod |
1000 |
Kit contents
Velbon CX-mini Tripod
Velbon CX-Mini tripod Head
Velbon Quick Release plate (QB-4LC)
Velbon Instruction Manual
For more information about, Velbon CXMINI, CX-Mini Tripod .
Customer Reviews on Velbon CXMINI, CX-Mini Tripod
Review by DANNY J DAVIS, 10/04/2008, Customer Rating:
I Use this CX Mini Tripod As an alternative to a Hide Clamp For Birdwatching. I am Very Happy with the CX Mini I have used very expensive scopes with Costly Hide Clamps and the CX Mini Compares Very Well.
So long as you adjust it correctly it is Very Stable and rigid (the built in spreader helps a lot here). You still get a bit of wobble when someone is walking around in the hide but this is just the same with the Hide Clamps all you need to do is leave all the legs folded up and rest the mini on the Hide Bench hold the base of the mini with one hand (to avoid accidents) and move the head with the other so in summary it is a very good piece of kit and at around 20 Quid I would Highly Recommend it
DD
