The Baader Colli Mark III Laser Collimator has a precision-etched reticule featuring hundreds of tiny cross-hairs which light up brightly when the reflected laser beam touches them. it is easily visible from any viewing angle. Even if the optics are off to a large degree, the reflected beam can be traced right through to the reticule and the telescope optics adjusted until the beam falls back on itself.
Note 1: Prior to using a laser you will need to first check/set a Newtonian telescope's secondary mirror using a sight-tube. Fortunately once set it rarely needs further adjustment.
Note 2: For any laser collimator to be effective it needs to be fitted to a well-made focuser. The regular rack-and-pinion style focuser fitted to many beginner/intermediate telescopes lacks precision and rigidity. If in doubt please contact us for advice.
Features - Baader Colli Mark III Laser Collimator
- Lightweight and very simple to use
- Produce an ultra sharp rounded laser beam
- An essential accessory for astronomical observations
- Can be used for SCT collimation if you centre-dot secondary first
- One-piece die-cast and machined aluminium housing guarantees a stable alignment
- Fits into eyepiece holder and assists in re-aligning your optics to correct distortions
- An extremely popular accessory that gives very accurate collimation (optical alignment) of all Newtonian and Schmidt-Cassegrain reflector telescopes
Note: If your telescope is out of collimation, images will get distorted and you will not be able to achieve a proper, pinpoint focus at some higher magnifications
Specification - Baader Colli Mark III Laser Collimator
- Model Laser Collimator
- Colour Red
- Illumination Source Laser
Kit Content:
Baader Colli Mark III Laser Collimator
User Operating Instructions Manual
For more information about, Baader Colli Mark III Laser Collimator website.
Back to top
Customer Reviews on Baader Colli Mark III Laser Collimator£89.00
Customers who shopped for this item also shopped for these items: |