The best lenses lead to better images, and the FT1 Mount Adapter lets you attach a range of NIKKOR F mount lenses to the 1 mount on Nikon 1 interchangeable lens cameras.
From extreme wide-angles to super-telephoto lenses and more, you can choose from over 60 lenses to suit your shooting situation or experiment with new creative ideas. When you use an AF-S NIKKOR lens, you can still make use of the Nikon 1 autofocus system and record.
Key Features
- The FT1 mount adapter allows NIKKOR F mount lenses to be used with Nikon 1 cameras equipped with a Nikon 1 mount. The angle of view of an F mount lens mounted on the FT1 is equivalent to that of a 35mm format lens with a focal length about 2.7 x longer.
- The FT1 can be used with more than 80 lenses, representing almost all the NIKKOR lenses currently on the market(*1).
- It almost goes without saying that it also supports autoexposure/autofocus(*2) and vibration reduction(*3). Electronic rangefinding is available in manual focus mode.You can also explore the new forms of expression offered by the Nikon 1's unique Motion Snapshot mode(*4).
- DX-format F-mount NIKKOR lenses can also be used with the FT1 mount adapter. IX-NIKKOR lenses, AF lenses for the F3AF, non-AI lenses, teleconverters, and auto extension rings cannot be used.
- Autofocus is available only with AF-S, AF-P lenses; other lenses support manual focus only. Set the camera focus mode to AF-S (the camera will not focus in other autofocus modes). The only AF-area mode available is Single-point AF and the camera focuses on the subject in the center focus point only.
- Available with VR lenses. Vibration reduction is always ON when shooting with a VR lens that has no Vibration reduction ON/OFF switch.
- Motion Snapshots can be recorded only when an AF-S or AF-P lens is attached and AF-S (Single AF) is selected for focus mode and then only when the camera is in focus. Available only when autofocus is used with AF-S lenses.
Specifications:
- Type: Mount adapter
- Supported cameras: Nikon 1 interchangeable lens format digital cameras (Nikon 1 V1 supported from firmware version A 1.10/B 1.10, Nikon 1 J1 from firmware version A 1.10/B 1.10)
- Dimensions: Approx. 61.5 mm diameter (excluding projections) x 42.5 mm
- Weight: Approx. 150 g/5.3 oz
Supplied Accessories
Body Cap BF-1B
Rear Lens Cap LF-N1000
Compatible Accessories
Lens Soft Case CL-N101