Description:
The Trail 2 LRF Series of Thermal Imaging Riflescopes features a new <40mK thermal sensor, exclusively manufactured by ULIS (for Pulsar). This puts Pulsar devices at the forefront of the market and allows their devices to produce a better image in conditions where there is a low-temperature difference such as during rainfall, fog, or cold mornings.
These environmental conditions are the most difficult for thermal imagers and this new sensor provides a clearer image for users.
Pulsar has also made significant improvements to the Trail 2 LRF's software, adding a proprietary Image Boost Technology, comprised of software algorithms designed to increase imaging clarity and overall image detail.
Image Boost results in a sharper, more detailed field of view and enhanced object identification capabilities.
The units also feature a built-in precision laser rangefinder for accurate rangefinding up to 1000m within ±1m. Has two modes; Single Time Measurement mode and Scanning mode.
Designed for the rigors of the outdoors with its strong magnesium alloy bodyshell (IPX7 rated) and high shock-resistance (6000 joules).
Completely Stream Vision compatible, allowing users to stream live to social media platforms, wirelessly transfer their captured videos & photos (16GB internal memory) to their smartphone or tablet, and remotely view, amend and check the status of their thermal device.
Features: Pulsar Trail 2 LRF XP50 Thermal Riflescope
- Long detection range
- Frost-Resistant HD AMOLED display
- Highly sensitive <40mK NETD thermal sensor
- 50Hz Refresh rate
- Focusable lens
- Dioptre control
- High recoil-resistance (12-gauge, 9.3x64, .375H&H)
- Magnesium alloy bodyshell
- "Display Off" mode
- Instant start-up (3 secs)
- Auto-Shutdown
- Side incline indicator
- PiP mode
- Built-In photo & video recorder
- 16GB internal memory
- Stream Vision compatible
- User-Friendly interface
- Built-In laser rangefinder
- IPX7
- Wide operating temperature (-25°C to 50°C)
- Built-in 3-axis gyroscope & accelerometer
- Four observation modes (Forest, Rocks, Identification & User)
- Three calibration modes (Manual, semi-auto, auto)
- Image boost technology
- Selectable reticles
- 5 Zeroing profiles (10 distances per profile)
- Quick-Change, rechargeable IPS7 battery pack
- MicroUSB port
- Retained lens cap
- Wide-angle eyepiece
- IPS Battery charger
Specifications: Pulsar Trail 2 LRF XP50 Thermal Riflescope
- Dimensions 351x102x74 mm
- Magnification 2.0x - 16.0x
- Field of View in Degrees 12.4°
- Lens 50mm
- Battery Type & Quantity APS2
- Resolution 1024x768 AMOLED
- Range 1800m
- Sensor Resolution 640x480 17µm
- Waterproof IPX7
- Operating Temperature -25°C to 50°C
- Frame Rate 50Hz
- Internal Memory 16GB
- Photo & Video Recorder Built-In
Kit Contents:
A quick-change, rechargeable IPS7 battery pack, for up to 13 hours (on average) operating time.